APC NetShelter Metered-by-Outlet with Switching Rack PDU, 2G, 0U, 11.0kW, 230V, 21 C13 and 3 C19 outlet

In stock

APC Metered by Outlet with Switching Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and individual outlet power metering Remote outlet level controls allow power on/off functionality for power recycling to reboot locked-up equipment and to avoid unauthorized use of individual outlets Power sequencing delays allow users to define the order in which to power up or down attached equipment Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding Current metering provides real-time remote monitoring of connected loads Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, and locking IEC receptacles User-defined alarms warn of potential circuit overloads before critical IT failures occur Users can access, configure, and control Switched rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager

SKU: AP8681 Category: Brand:
Overview
Presentation APC Metered by Outlet with Switching Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and individual outlet power metering. Remote outlet level controls allow power on/off functionality for power recycling to reboot locked-up equipment and to avoid unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, and locking IEC receptacles. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.
Lead time Usually in Stock
Main
Colour Black
Product or component type PDU
PDU type Switched metered outlet
Cord length 1.8 m
Provided equipment CAN port terminator
Installation guide
Rack mounting brackets
Safety guide
Serial configuration cable
Complementary
Input Voltage 400 V 3 phases
Height 1829 mm
Width 56 mm
Output Voltage 230 V
Depth 51 mm
Net weight 8.23 kg
Mounting location Side
Mounting preference No preference
Input Plug Type IEC 60309 16 A 3P + N + PE
IEC 60309 20 A 3P + N + PE
Mounting mode Rack-mounted
Rack units 0U
Mounting position Vertical
[In] rated current 16 A
Max line current 16 A
Input current limits 16 A
Load capacity 11000 VA
Network frequency 50/60 Hz
Outlet type and quantity 21 IEC 60320 C13
3 IEC 60320 C19
Environment
Product certifications cUL listed
UL listed
VDE
Standards EN 55022 class A
EN 55024
EN 61000-3-2
EN 61000-3-3
FCC part 15 class A
ICES-003
Ambient air temperature for operation -5…60 °C
Relative humidity 5…95 %
Operating altitude 0…10000 ft
Storage Relative Humidity 5…95 %
Storage altitude 0…15240 m
Packing Units
Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 203.8 cm
Package 1 Width 16.2 cm
Package 1 Length 11.7 cm
Package 1 Weight 10.478 kg
Contractual warranty
Warranty 2 years repair or replace
Be the first to review “APC NetShelter Metered-by-Outlet with Switching Rack PDU, 2G, 0U, 11.0kW, 230V, 21 C13 and 3 C19 outlet”

Your email address will not be published. Required fields are marked *

Reviews

There are no reviews yet.